Stacks Image 213

Additional specs
Type: Passive Ribbon (velocity) Microphone Ribbon Specifications: 99% Pure aluminum, 1.8 micron, 2" (L) X 3/16" (W)
Polar pattern: Figure 8
Frequency response: 30 to -15,000 Hz
Output Impedance: 3.3K ohms
Recommended load impedance: 1400 Ohms
Connector: 3-Pin male XLR
Ribbon Mic Care

Backwards
Forwards
CARE OF RIBBON MICROPHONES:The active element of a ribbon microphone is a very thin corrugated aluminum strip, clamped under tension between two strong magnets. This design can make ribbon microphones very sensitive and fragile. Many ribbon microphones require special care and handling. It is a very bad idea to blow into a ribbon mic, put it directly in front of a kick drum, or loud amplifier speaker. Avoid strong blasts of air of any sort, since this can rip or stretch the ribbon element, changing the response or worse. It is a good idea to use a pop filter, when possible, to eliminate vocal spray or sudden air movement. Dropping any microphone is to be avoided – especially a ribbon microphone. Never apply any phantom power to your ribbon microphone. Phantom power will not destroy a ribbon microphone but a patch bay or faulty cable that shorts to ground with phantom power on can. So, avoid phantom power. Always keep the microphone covered in the bag or case provided, when not in use. The strong magnets can attract "tramp metal" and impinge the ribbon movement. Damaged ribbons due to neglect are not covered by our warranty* and there may be a charge to replace them.
Backwards
Forwards

POTOFONE WARRANTY


Potofone warrants all products against defects in materials and workmanship for a period of (5) five years from the date of original user purchase.
This warranty is offered to the original purchaser only and is not transferable.
Ribbon elements are warranted for a period of one year from the date of purchase and will be replaced one time during the warranty period if they fail.
Vacuum tubes are warranted for a period of 90 days from the date of purchase and will be replaced one time during the warranty period if they fail.
Potofone will either repair or replace the product at no charge during the (5) five year period.
Buyer is responsible for return shipping charges if past the initial first 30 days of purchase.
Please retain and use original packaging.
Please use support page to contact us about shipping returns.
THE WARRANTY WILL NOT APPLY TO THE PRODUCT IF IT HAS BEEN DAMAGED BY MISUSE, ACCIDENT, IMPROPER HANDLING OR OPERATION, OR IF UNAUTHORIZED REPAIRS OR MODIFICATIONS ARE ATTEMPTED OR MADE.
If service is required out the warranty guidelines, we will contact you for authorization before any repairs are made.

3552C Passive Ribbon Microphone

With unique technology, design features, quality materials and construction, Potofone Ribbon Microphones are the correct choice for  studio and live performance recording.The Potofone 3552C has a figure-8 pattern and a frequency response that is flat from 30 to 15,000 hz. The Potofone 3552C ribbon transducer is of a unique design that minimizes the signal path, from the front to the back of the ribbon.The Potofone is manufactured and hand-assembled in the USA from state-of-the-art transducers, transformers and materials.
Stacks Image 193
  • Powerful custom rare earth neodymium magnets
  • Ultra short path ribbon motor
  • Dual vibration isolation - internal and external shock mounting
  • Electrically transparent field housing
  • Meticulously crafted CineMag™ transformer
  • High-abuse mil-spec Neutrik™ XLR connector
  • Handmade and hand-tuned in the USA
  • 5 year warranty* more..
3552C Passive Ribbon Microphone

QTY:

$1295.00
3552C Passive Ribbon Microphone – Matched Pair

QTY:

$2495.00

Construction

Fine stainless steel mesh set into heavy gauge machined 6061 aluminum housing with molded urethane end caps. Electrically neutral magnet motor eliminates stray magnetic fields. Included open front shock mount allows for close mic placement and unimpeded sound path.
© 2016 Sporeleki Industries. All Rights Reserved contact